Many gamers who play the Destiny 2 game have complained about facing the error code anteater. This error disrupts their game time and causes them to have a quite frustrating gaming experience. 

The good news, however, is that it can be fixed. In this article, I will discuss some effective solutions to the error code anteater and other things you should know about it. 

What is the Error Code Anteater? 

Error code anteater is one of the errors that can be encountered while playing Destiny 2. Like other errors such as the error code buffalo and the error code weasel, error code anteater is caused by a breach in the connection between the host and the server.

What Causes the Error Code Anteater? 

According to Bungie, the errors are unrelated to the Bungie server; instead, they come from faults like network/hardware compliance issues, unstable connections, or Wi-Fi issues.

Therefore, the fault is either with your device or your network connection. Thus, adjusting your configuration setting and other changes can help you get on with your game.

How Can You Fix the Error Code Anteater?

To fix your Destiny 2 error anteater, there are several suggested solutions, depending on your device and the state of your internet and equipment. The solutions outlined below will most likely be of great help.

Solution 1 – Stop the Wi-Fi connection

Most games that demand the transfer of data require the use of an internet connection. It is more advisable to play these games over a wired connection than with hotspots or data. This is because many errors occur in Destiny 2, and they are mostly caused by a glitch in the internet connection, often initiated by the Wi-Fi.

So, to make the most of your game, a wired connection should be considered. Most users who opted for this solution when experiencing the error code anteater could proceed with their game and continued playing without further connection problems.

Of course, this is after changing their connection from hotspot or Wi-Fi to a wired internet connection. You can try this solution too if you are getting error responses from your Destiny 2.

Solution 2 – Clear Cache

For consoles, the error might be due to problems in the cache memory. The solution, in this case, is to clear the cache memory completely.

Clearing the cache on the device is another option for restoring your game and resolving the anteater error. By clearing the cache, you not only solve the error issue, but you can also fix other game problems. However, this solution is only applicable to Xbox users. So, players who use PlayStation or PC can look out for other solutions that apply to their devices.

Also, caution should be taken while using this solution. You must make sure the game is backed up and synchronized online because all the game data will be cleared from your device storage.

There are two methods of clearing cache and resetting your Xbox memory. They include the manual reset, and the cache reset through settings. 

Manual Reset

Step 1 – First, power off the Xbox by pressing down on the power button.

Step 2 – Next, remove the power cable from the back of the Xbox. Press and hold the power button repeatedly to drain the power. Doing this will format the Xbox memory and clear the cache.

Step 3 – You can then connect the power cord back into the Xbox and wait till the Xbox comes back on.  This is at the point when the white light changes to orange.

Step 4 – After all these, you can switch on your device as you usually would and try to access your game to check if you still have the Destiny 2 error code anteater.

Cache Reset Through Settings

To clear cache through settings, locate the Xbox settings on your device, click on network settings under it, and then click on advanced settings. Proceed to Alternate Mac Address and choose the ‘clear’ option.

Xbox will request confirmation, and you have to respond in the affirmative. When this is done, your device will restart and reset the cache. After this process, you can try to access your Destiny 2 to ensure the error has been resolved.

Solution 3 – PlayStation Hard Reset

Like the Xbox, PlayStation also does not have a clear cache option. However, using the hard reset process does the job of clearing the cache. PlayStation owners can again try using this method to resolve error codes.

Step 1 – To begin, shut down the PlayStation device completely.

Step 2 – Next, you should disconnect the PlayStation’s power cord and leave it for some time to end the runnings on the device and to allow the PlayStation to shut down completely.

Step 3 – Return the power cord into the PlayStation and start the device as you would typically do. Then, confirm if the error has been resolved.

Solution 4 – Contact Your Internet Service Provider

According to Bungie, the error code anteater can be from a fault with your ISP, and it is crucial to put a call across to be sure. When a website is not working or when a game is faulty, the problem might be from the services provided by the internet servers. 

When you contact your internet service providers, request for the level of your connection speed to be worked on. Sometimes, a call to your internet service provider is all that is required to get your game running again. 

Solution 5 – Replace Internet Cables

Often, when users have problems with their gaming devices, the issues result from old internet cables. If you have been using the same internet cables and devices for several years, changing them might be what you need to do for a better gaming experience. 

Even after installing a new cable, it is recommended that you should have a spare one to test with. It is also necessary to always double-check your lines because even new wires can be faulty. Some users have attested to resolving their error code by merely changing a leaking or faulty cable. 

Solution 6 – Check Firewall

This solution is for PC users. The Firewall software is an anti-malware software incorporated into the operating system to protect your PC from harmful software. This is often the origin of the problem for PC users because the error can also be a result of the Windows Firewall attempting to block Destiny 2. 

There are a couple of options to try for a solution. One of the alternatives requires no risk at all; it merely involves adding the game (Destiny 2) to the exception list of the system- Windows.

The alternative option is to turn off the Windows defender and then attempt to play the game. If this option works, it means that the problem is from the Windows Defender.

If, indeed, the problem was caused by Windows Defender, then the game must be added to its exception list. Doing this will reduce the chances of a more significant problem because turning off the Defender is only a short term fix and may cause more harm to the system.

Conclusion 

Most likely, one of these solutions will help resolve your game’s error code anteater. It is necessary to note that more than one solution might be required for your game to function correctly. So, check appropriately with the solutions that best suit your device and give them a try to resolve your anteater.

It is also essential to take precautions to avoid another occurrence of the error. So, users should ensure to play the game over a wired internet connection as against Wi-Fi or hotspot connection.

Also, clear cache from time to time to free up space and ensure a clear system. It is imperative, too, to ensure the functionality of internet cables and equipment to avoid errors like this. 

Facebook Twitter Pinterest Linkedin Email